Who made this boat hull?
3 Attachment(s)
Curious who made this hull. Owner said its 42 feet long.
Attachment 371779 Attachment 371780 Attachment 371781 |
i believe it is the old axiom hull challenger had the molds. about a year are sdo ago i was out at challenger in Washington Mo and i believe that hull was in their yard. Years ago at the Tan Tar a boat show at LOTO there was one on display 3-465 was a low 60's boat .
later |
Originally Posted by later
(Post 2765268)
i believe it is the old axiom hull challenger had the molds. about a year are sdo ago i was out at challenger in Washington Mo and i believe that hull was in their yard. Years ago at the Tan Tar a boat show at LOTO there was one on display 3-465 was a low 60's boat .
later |
There is a really nice one that has been in Grand Haven MI for years. They built a few in Grand Haven if I remember the story right. They were called Axioms, Marc/Boatme I am sure knows all the specifics. MR
|
no idea
|
As far as I remember the Axioms by Offshore Concepts were wider hulls than the one pictured above. I think I once read they used widened Cig molds?
|
Here is a link to the one I mentioned was in in Grand Haven. Apparently it is now For Sale . MR
http://www.boat-world.com/disppic.ph...057953&picno=2 |
The on ein the photos is the boat at the Tan Tar a boat show i believe.
later |
i believe the boat in the add is the one in the Tan Tar a boat show back in the 1990's i was thinking about.
later |
All times are GMT -5. The time now is 04:24 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.