How to pump up 350 MAGS
#1
Registered
Thread Starter
Join Date: Nov 2008
Location: East Lyme, CT
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
How to pump up 350 MAGS
I'm looking for ideas on how to gain some more HP from my 350 EFI MAGS.... any thoughts are appreciated.
Last edited by JayFan; 01-05-2009 at 09:09 PM.
#4
Registered
iTrader: (3)
Use your block, Scat crank and rods, SRP pistons, Edelbrock RPM Intake and 750 CFM carb, World Sportsman II heads 2.02 intake valves 200 cc runners And A Bullet Racing HYD roller cam Part # CHS 288/296-10HR [email protected] Int 223 Exh 231 Lift Int 530 Exh 548 at a 110 centerline Comp pro mag roller rockers , going through Stainless Marine Exhaust . We put these in a 1987 272 Formula sr-1 . With the 350 mags it would run 54 on gps , after 69.9 on gps. I hope this helps.
Joby
Joby
#6
Registered
I have done both Prochargers and Whipples on those engines with great success. Either supercharger made near 500 hp. Both the customers and I were very pleased with the end result. There are a few things that need to be done if you want to run over 5 psi. To make 500, it took 7-8 psi, depending on the blower used. Let me know if you have any questions.
Eddie
Eddie
#10