Anybody upgrading to biggere power this spring??????
 

I was wondering if anyone was planning on upgrading to bigger power this spring and if you where who was doing the work???? I figure the way everybody talks the boating market is dead so I figure people are trying to be happy with what they have.

I should have spell checked my title huh well it made you look to see if I was just an idiot.

Dropped some parts off at Precision Marine in New Orleans couple days ago, Mark said it was dead for awhile but is now extremely busy. Lots of new motors and rebuilds, including a pair of Merc 1075s.

Larry Peto AKA Larrys Engine & Marine in Tuscon Ariz there crazy busy up there but fitting in our new power plants :ernaehrung004::ernaehrung004:

I am building a new motor this year. Going to try presurizing it. Dave at WESCO is doing the machine work.. And everything came out right on the money... :)

I am making my 750's to 1100's detuned to 1000's

Jim at Maximum Performance Marine in DE is doing it.. He is busy now too. A little slow at xmas but he has quite a few project there!!
Should be complete sometime in April.. Doing a Compete Dash make-over and a Fresh power... Doing some custom Rigging too.

New motor's, some rigging, bilge paint, 454 to 502.

Sweet OE.

Mark at precision marine is doing my motors as well

502's to 540's with new stainless exhaust and outdrives

Dennis Berry of Berry Performance Marine, former owner of the Bermuda BerryCuda is building me a nice enhanced BBC for my recently acquired IMP...Nothing compared to what some of you have, but a $1000 for the boat, new (3 hour old) outdrive and trailer, I couldnt pass it up!

http://i3.photobucket.com/albums/y96...leganza003.jpg

[QUOTE=FlyinZX14;2779613]Dennis Berry of Berry Performance Marine, former owner of the Bermuda BerryCuda is building me a nice enhanced BBC for my recently acquired IMP...Nothing compared to what some of you have, but a $1000 for the boat, new (3 hour old) outdrive and trailer, I couldnt pass it up!

http://i3.photobucket.com/albums/y96...leganza003.jpg[/QUOTE;

GREAT BOAT. remember them well. it became a 24 magnum as well. no? Marc Bam had 1.

I dont know a whole lot about them other than the thread here about them, actually, thats how I found OSO. If anyone knows any specs on this boat I would like to hear it!
Im moving up from a 19' Wellcraft so this is my first "bigger boat" and Im already having a bigger engine put together for it :ernaehrung004:

My motors are fine ,but everything Else went to sh!t:mad:

IMP = INTERNATIONAL MOLDED PLASTICS. OWNED BY APECO WHOM ALSO BOUGHT MAGNUM MARINE.DEFFERANT CENTURY. CYA.

whu happened?

GLASSMITES?

new DEAN GELLNER 572 1050HP this spring some mods on the boat to.:party-smiley-004: so should be out there.:p

lookin for a 14-71 used....

Gellner doing some magic on what ever those things I had in my boat were.:cool-smiley-027:

dean gellner had one or two for sale.

He sure can do magic whats nice is he takes the time to explain things to you and gives good advice.

I think pyburn has some for sale... not sure on specifics though. You can find them in the SOS classifieds.

Looking to get a somewhat of a three digit speed two hulled dinghy for the mut, more than likely this spring.

Yep!

there were some 24 and 28 skaters for sale

I have one new 1271 Mooneyham @ $2500.00 and 2- 1071 Mooneyhams that are used for sale also.

I have two 871's with carbs for sale.. Pm me if you are interested.

You're buying TRIPPLE DIGITS!!!:party-smiley-048:

those arent 1075 there are old cooking motors:party-smiley-004: