Boat market for around 25K range
#32
Registered
iTrader: (1)
Depends on your idea of "light".
Motor is a tall deck with 4.250/4.250. Block is brand new GM tall deck, new eagle rotating assembly (professionally worked over prior to installation - A MUST!), Brodix Big Brodie supercat heads with our head guys "touch" (killer), custom profile solid roller, jesel lifters, t&d lifterss, etc. 9.4:1 for pump gas. About the best I could build reasonably and have a bravo even hope to live behind it.
On the dyno we didn't push it at all, conservative tune and it still made 695hp at 6200rpm and 615ftlb of torque. took her higher but with the cheapie canton pan and no scrapper i was running for the dyno caused the oil to aerate. Power was still on the incline but being a pleasure boat I was more than happy with these numbers so I didn't push it.
I'd say 700hp is plenty for this boat unless you wanted to venture away from the bravo drive.
Maiden voyage with this power will be this spring. No clue on speeds. you could talk to Will but I would guess 80s no problem.
Motor is a tall deck with 4.250/4.250. Block is brand new GM tall deck, new eagle rotating assembly (professionally worked over prior to installation - A MUST!), Brodix Big Brodie supercat heads with our head guys "touch" (killer), custom profile solid roller, jesel lifters, t&d lifterss, etc. 9.4:1 for pump gas. About the best I could build reasonably and have a bravo even hope to live behind it.
On the dyno we didn't push it at all, conservative tune and it still made 695hp at 6200rpm and 615ftlb of torque. took her higher but with the cheapie canton pan and no scrapper i was running for the dyno caused the oil to aerate. Power was still on the incline but being a pleasure boat I was more than happy with these numbers so I didn't push it.
I'd say 700hp is plenty for this boat unless you wanted to venture away from the bravo drive.
Maiden voyage with this power will be this spring. No clue on speeds. you could talk to Will but I would guess 80s no problem.
Last edited by fantastixvoyage; 02-05-2009 at 03:49 PM.
#33
Registered
Platinum Member
I was confused. Good luck on the sale.
#34
Registered
Join Date: Jan 2006
Location: Royal Oak, MI
Posts: 1,820
Likes: 0
Received 0 Likes
on
0 Posts
Haha. If you decided 10K was the price though, you can consider it sold before you update a thing.
#38
Registered
Join Date: Mar 2006
Location: Lake George NY
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
I have a 27 Avanti with new Performance trailer. Boat needs nothing was redone in winter of 05-06 is garage kept and freash water boat 12k can't post pictures here,if interested e-mail [email protected] and I will sent pic and more info
#40
Registered
iTrader: (1)
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
I could probably get close on my 28 Pantera with the motor. One IMCO powerflow manifold should be repaired or replaced. If he wanted it without the motor, I would be well under what he's wanting to spend...
Chris
chrisbeitz((at))tds((dot))net
Chris
chrisbeitz((at))tds((dot))net