i need some HELP{cobra terminator 3000}
 

i need to know where i can get pics of this boat with tripple 2.5s on it and some specs. i think its call the treminator 3000 its the 30' cat center console that cobra powerboats made in the mid to late 90s.ANY HELP IS WANTED!!!

there was one siiting at a boat broker in Camdenton MO, not sure if it is still there, disappeared before it got snot freezin cold. Prolly be back in the spring.....

is there any other center console fishing boats that have a top mph like the treminator 3000{in the 90mph}???

I think that cat is it for 90 most vees are 45 to 78

Here:

http://cgi.ebay.com/ebaymotors/JAGUA...QQcmdZViewItem

There was a sutphen center console online for a while. Not sure of the MPH but It was an outboard boat

I do have a test report and Cobra brochure that I can scan for you. All I need is Your email address.

my email is [email protected] does it show how fast it will run in the brochure?

i was told today that the cat was called the preaditor not the treminator. and it did not come with 3 2.5Ls is this true.cause i remember seeing a cobra cat with 3 2.5Ls on the cover of hot boat back in 96-97

Took some time 'cause the email come back all the time so here is all I have about this hull:

http://i239.photobucket.com/albums/f...9/cobra012.jpg

http://i239.photobucket.com/albums/f...9/cobra013.jpg

http://i239.photobucket.com/albums/f...9/cobra014.jpg

http://i239.photobucket.com/albums/f...9/cobra015.jpg

http://i239.photobucket.com/albums/f...9/cobra003.jpg

http://i239.photobucket.com/albums/f...9/cobra004.jpg

http://i239.photobucket.com/albums/f...9/cobra005.jpg

http://i239.photobucket.com/albums/f...9/cobra006.jpg

http://i239.photobucket.com/albums/f...9/cobra007.jpg

http://i239.photobucket.com/albums/f...9/cobra008.jpg

http://i239.photobucket.com/albums/f...9/cobra009.jpg

http://i239.photobucket.com/albums/f...9/cobra010.jpg

http://i239.photobucket.com/albums/f...9/cobra011.jpg

finally one Terminator with 2.5 EFIs:

http://i239.photobucket.com/albums/f...9/cobra001.jpg

i used to work 4 cobra in th 90's we set up the race & pleasure boats w/ 2 outboards w/ short shafts you want the nose cone to ride an inch to an in & 1/2 above the 4 inch pad it runs behind off of the hull we had the engines in on brackets that stepped them off the transom about 10 inches if you want to add the center motor it would need to be a long shaft i think i am not 2 sure what the sweet spot is 4 the rigging the power head did sit a little higher w/ all three motors in line on the transom when i worked thier i did more work w/ the pleasure 30 ft w/ the blackhawk drive good luck

Helluva price for a 30' cat if it's in the condition the seller says it is.

MD #s In Fla,,Bet Its A Scam