500 EFI Problem
#1
Registered
Thread Starter
Join Date: Oct 2007
Location: Chattanooga, Tn
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
500 EFI Problem
I have twins Starbard motor after running one minute I lose fire and the motor cuts off
BOAT HAS MSD BOXS AND DISTRIBUTORS AND # 2 MSD LARGE BLUE COILS
Changed coils no difference
you wait about 3 to 5 minutes and the motor starts up and does the same thing
any advice
BOAT HAS MSD BOXS AND DISTRIBUTORS AND # 2 MSD LARGE BLUE COILS
Changed coils no difference
you wait about 3 to 5 minutes and the motor starts up and does the same thing
any advice
#5
Registered
Join Date: May 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
new one
Not so sure about the pickup...it is a possibility, as it does tell the coil to fire, but I've never personally heard of an intermitent problem with those... The fact that it starts back up and repeats says computer control mod inside msd box...
#9
Registered
Join Date: May 2009
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I hate to talk bad about a product, but over the years I've ran into WAY TOO MANY funny little problems with msd products. I'm talking problems that stump GOOD mechanics.. Mallory or for most cars atleast, the stock stuff supports around 500 hp.