Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Motor Damage During Shipping ?????? (https://www.offshoreonly.com/forums/general-boating-discussion/203546-motor-damage-during-shipping.html)

RunninHotRacing163.1 03-11-2009 02:01 PM

1 Attachment(s)

Originally Posted by 10x (Post 2818160)
Not rambling at all, I think you explained that very well. Sometimes it's just easier to do it yourself than to try and explain it to someone how to do it themself, especially when you're trying to type it. :eek: LMAO

Bill, what's the update ??

Hey Frank hoping to try tommorrow or Friday , been a crazy week up here in Seneca the river is 6.5 feet over the banks :eek:

10x 03-12-2009 01:14 PM


Originally Posted by RunninHotRacing158 (Post 2819124)
Hey Frank hoping to try tommorrow or Friday , been a crazy week up here in Seneca the river is 6.5 feet over the banks :eek:

:eek: Holy $hit !!! 6.5' over the bank ??? I'm supposed to bring the boat to Nabbers, wonder if I can just "drive it in" LMAO :rolleyes:

RunninHotRacing163.1 03-13-2009 09:29 AM

1 Attachment(s)

Originally Posted by 10x (Post 2819805)
:eek: Holy $hit !!! 6.5' over the bank ??? I'm supposed to bring the boat to Nabbers, wonder if I can just "drive it in" LMAO :rolleyes:

Should be good now she dropped 4.5 ft in 48 hours , talked to Tom on tuesday and they were sweatin bullets ... he did say they are crazy busy and ballz to the wall :ernaehrung004:
16' is in the banks and she normally runs at 6.0 thats where we set the dock at .. Are you going to Capt Nabbers today BIG Daddy ??
We're Hangin at FAT DADDYS today behind the B.P. in Seneca (green beer)and takin the partay to Marseilles tonite .

Panther 03-20-2009 11:23 AM

Get your idle surge squared away??

RunninHotRacing163.1 03-20-2009 12:08 PM


Originally Posted by Panther (Post 2825390)
Get your idle surge squared away??

Hey Frank thanks for askin :ernaehrung004: i have the tuner at the shop today tweakin it in & i'm gettin ready to head down there and hear the Beast! timing was way way out of wack on the motor that was not run again with the new blower installed ...it may have got bumped or moved while changing blowers & packaging ...and YES 700-1100 rpm on the hose , pyros 1100 degrees ,O2s 11.5 :cool:

glassdave 03-20-2009 12:14 PM

Hey big daddy what was the measurments you wanted the transom mask again? Cutting vinyl today then heading to fed-X :eek: :D


Been busy as fuk here!

RunninHotRacing163.1 03-20-2009 12:26 PM


Originally Posted by glassdave (Post 2825438)
Hey big daddy what was the measurments you wanted the transom mask again? Cutting vinyl today then heading to fed-X :eek: :D


Been busy as fuk here!

Dave give Bob a call at the shop , i have'nt made it there yet today but he needs the Chit :grinser010:


All times are GMT -5. The time now is 02:33 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.