Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Survey- Bravo x drive reliability?? >

Survey- Bravo x drive reliability??

Notices

Survey- Bravo x drive reliability??

Thread Tools
 
Old 03-18-2002, 11:52 AM
  #1  
Registered
Thread Starter
 
Cattitude's Avatar
 
Join Date: Jun 2001
Location: Tulsa, OK, Grand, Beaver, LOTO
Posts: 1,213
Likes: 0
Received 0 Likes on 0 Posts
Question Survey- Bravo x drive reliability??

Cobra Marty had a great thread last year on Bravo's failures and factors. Many of us now have or are considering x drives (x,xz or xr) in the future. It would be great to hear from those who have accumulated some hours on these drives and learn how they are doing. If I remember right there were some reports of gimbal hsg failures and also short lives when pushing a heavy boat. I believe Goodfella @ Dollar even reported the xz upper gears holding up better in the factory racers. For those of you with some hours, please report what you can:

Which drive?
still alive?
hrs on drives?
hp/tq?
single/twin/triple?
prop pitch/gear ratio?
showered?
length/wt of boat?
v or cat?
internal inspections and results?
lube used?
gentle/ average or madman on the sticks?
frequent air time?

Thanks for your help!
Cattitude is offline  
Old 03-18-2002, 12:45 PM
  #2  
Registered
 
Turbojack's Avatar
 
Join Date: Sep 2001
Location: Houston, TX, USA
Posts: 2,287
Likes: 0
Received 0 Likes on 0 Posts
Default


Which drive? XZ
still alive? No problems to date
hrs on drives? 50+
hp/tq? 600+ twin turbo
single/twin/triple? S
prop pitch/gear ratio? 30 bravo 1, 1.36
showered? Yes
length/wt of boa t? 26',
v or cat? Cat, 2001 daytona 26
internal inspections and results? not yet
lube used? stock
gentle/ average or madman on the sticks? gentle to average
frequent air time? maybe 3 times

Last edited by Turbojack; 03-18-2002 at 12:54 PM.
Turbojack is offline  
Old 03-18-2002, 04:18 PM
  #3  
AKA NORTECHJ
Gold Member
iTrader: (1)
 
SCARABJ's Avatar
 
Join Date: Mar 2001
Location: orange park fl.
Posts: 832
Likes: 0
Received 0 Likes on 0 Posts
Default

Which drive? xz uppers/ imco 2 inch shorter lowers
still alive? yes
hrs on drives? 35
hp/tq? 725 hp 509 eickerts w/prochargers
single/twin/triple? 2
prop pitch/gear ratio? 30 1.36 97 radar
showered? yes
length/wt of boat? 32 8500
v or cat? v
internal inspections and results? no
lube used? merc high performance
gentle/ average or madman on the sticks? gentle
frequent air time? very little
went with xzs because the gear 1.36
SCARABJ is offline  
Old 03-19-2002, 06:06 PM
  #4  
Registered
Thread Starter
 
Cattitude's Avatar
 
Join Date: Jun 2001
Location: Tulsa, OK, Grand, Beaver, LOTO
Posts: 1,213
Likes: 0
Received 0 Likes on 0 Posts
Default TTT

TTT- I know there are people out there with some hours on these- tell your story!
Cattitude is offline  
Old 03-19-2002, 06:46 PM
  #5  
Charter Member #1093
Charter Member
 
SteveDavid's Avatar
 
Join Date: Feb 2001
Location: Lighthouse Point & Ocean Reef FL
Posts: 660
Likes: 0
Received 0 Likes on 0 Posts
Default

XR drives
no failures, yet or possibly .........
Triple 700(s) supercharged (Whipples) 500 EFI's
showered
Vee bottom, step, notch, extension box
boat weight app. 13,500 pounds
1.36 ratio
31 pitch Hydromotive 5 blades
length 43'
gentle on the throttles
app. 100 hours run time
Merc. green gear lube
Taken off and lubed at 50 hours, everything OK, and again at 100 hours all OK except Pinion seal shot on Port outside drive (Apparently common problem on XR drives) When this goes, it leaks drive fluid into the bellows and then the bilge.
Air time, some, most trips are lengthy to Bahamas or Keys.
SteveDavid is offline  
Old 03-19-2002, 09:57 PM
  #6  
Registered
 
Join Date: Feb 2001
Location: Redlands Ca
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Arrow

Which drive?
XZ
still alive? Yes

hrs on drives? 65

hp/tq? 700 HP500 whippled

single/twin/triple? s

prop pitch/gear ratio? 1.5 labbed 32

showered? y

length/wt of boat? 27 4300lbs.

v or cat? cat

internal inspections and results? small shavings at break in and minmal shavings at 40 hr lube change.

lube used? merc grn.

gentle/ average or madman on the sticks? average

frequent air time? little air.

Steve ..

Did you get the 31s from Gary yet?
Garry is offline  
Old 03-20-2002, 10:53 AM
  #7  
Uncle Toys
Guest
 
Posts: n/a
Default

Sorry Cattitude, I don't have anything to add - only Bravo Ones. But at least I can get your worthy thread back to the top.
 
Old 03-20-2002, 11:49 AM
  #8  
Registered
 
Join Date: Oct 2000
Location: Cora
Posts: 1,180
Received 0 Likes on 0 Posts
Default

Which drive? XR
still alive? Yes
hrs on drives? 135
hp/tq? 500 EFI's
single/twin/triple?Twin
prop pitch/gear ratio? 30 1.5
showered? Intercooled at 120 hours
length/wt of boat? 35 Cig 8,300
v or cat? V
internal inspections and results? Good
lube used? Mercury & Royla Purple
gentle/ average or madman on the sticks? Average
frequent air time 25 % Ocean rest on small lake.

Did have a problem with seals at 100 hours as Steve described.
Brad is offline  
Old 03-20-2002, 11:58 AM
  #9  
Registered
 
sterndrivespec's Avatar
 
Join Date: Jan 2001
Location: constantia n.y. usa
Posts: 277
Likes: 0
Received 1 Like on 1 Post
Default

XR drives
37 profile
twin 600 hp blower motors
50+hours
mostly in poker runs
the uppers were new,the lowers had 90+ hours on them with 900 hp,everything still like new
sterndrivespec is offline  
Old 03-21-2002, 01:16 PM
  #10  
Registered
Thread Starter
 
Cattitude's Avatar
 
Join Date: Jun 2001
Location: Tulsa, OK, Grand, Beaver, LOTO
Posts: 1,213
Likes: 0
Received 0 Likes on 0 Posts
Default ttt

ttt
Cattitude is offline  


Quick Reply: Survey- Bravo x drive reliability??


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.