![]() |
1 Attachment(s)
:drink:
|
anyone have a six close by? what is the distance from the top of the gear case to the top of the cavitation plate?
|
Originally Posted by Jesse James
(Post 2813634)
anyone have a six close by? what is the distance from the top of the gear case to the top of the cavitation plate?
|
Thanks....
|
Originally Posted by Jesse James
(Post 2813634)
anyone have a six close by? what is the distance from the top of the gear case to the top of the cavitation plate?
|
Originally Posted by 14 apache
(Post 2814179)
Old style is 11" new style +1" or 2". The drive shaft to prop shaft is 18.5"or 19"
|
Originally Posted by daredevil
(Post 2814255)
Your right about the Propshaft to driveyoke !!! Missunderstood that ,,,but what is the difrents in the housing between an old and new style six ???? They should be the same exept for the sweptback on the lower ?!:party-smiley-004:
|
Originally Posted by 14 apache
(Post 2814268)
They raise the top so the gear can be switched for left or right hand rotation. The old style switched rotation in the lower like the other speed masters. early style tie bar mounts to the back of the upper case new style mounts to top.
|
| All times are GMT -5. The time now is 12:24 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.