Race Boat Tead Down (Video Series)
 

We thought we would make a series of videos explaining what goes on behind the scenes of the races. We're tearing apart a race boat and putting it back together. Jesse has over 12 years of racing and repair experience so he's pretty much up to speed. No pun intended! If you have any questions or comments please post them on the video. Will try and answer them as we tape more videos. Here is are first, By no means are we producers and professional cameramen. Hope you like it!
http://[youtube]http://www.youtube.com/watch?v=Qzjas9NJmzE[/youtube]

Video #2

Jesse talks about bondo,spoons,and the bent bottom and how it affects the boats handling.

[YOUTUBE]http://www.youtube.com/watch?v=uS_avUZlxhk[/YOUTUBE]

This one is short: grate & ride plate

[YOUTUBE]http://www.youtube.com/watch?v=7oeAkFvQWx4[/YOUTUBE]

Videos 4 and 5


Video 4 Revisitng the spoon

[YOUTUBE]http://www.youtube.com/watch?v=hIASUiuVK6o[/YOUTUBE]

Video 5 Bottom and Bondo

[YOUTUBE]http://www.youtube.com/watch?v=koJbf8xQGvE[/YOUTUBE]