Anyone want to trade drives? No.6 1:35's for 1:24's
#1
Anyone want to trade drives? No.6 1:35's for 1:24's
I just purchased a set of No.6 drysumps 1:35 ratio with 2 hours on them. I need 1:24 ratio. I was thinking, rather then going to the expense of changing gears in relatively new drives, maybe someone is in the same boat and needs 1:35's. If you have any interest, please let me know. [email protected]
#3
Registered
#4
#5
Registered User
Join Date: Jun 2006
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I would think that boat is plenty fast with the 1.35's, 1.24's will only give you maybe another 8mph, for the expense of changing gears, buying new props and losing some accerleration and midrange punch, unless you just want to run a big number
#6
A to Z
Platinum Member
I just purchased a set of No.6 drysumps 1:35 ratio with 2 hours on them. I need 1:24 ratio. I was thinking, rather then going to the expense of changing gears in relatively new drives, maybe someone is in the same boat and needs 1:35's. If you have any interest, please let me know. [email protected]
#7
PF Marine
Platinum Member
I just purchased a set of No.6 drysumps 1:35 ratio with 2 hours on them. I need 1:24 ratio. I was thinking, rather then going to the expense of changing gears in relatively new drives, maybe someone is in the same boat and needs 1:35's. If you have any interest, please let me know. [email protected]
#8
I want to lower the RPMs at cruise. Rught now I have 40P herings and I'm on the rev limiter very quickly. I have no options. If i go to 1:24 I have all the options in the world, i can put on a 37 or 38 props and have tons of accel. or I can throw on a big prop and get high numbers. I would love to be able to cruise at 120 and be at 4k rather then 5k. Less wear and tear on everything and also much less fuel consumption.