Question about MSD Advance spring kit??? Timing/RPM
#1
Registered
Thread Starter
Join Date: Aug 2008
Location: Haslet, TX
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Question about MSD Advance spring kit??? Timing/RPM
Ok I'm redoing my twin 509s in my Baja. And when tearing everything apart. The springs underneath my MSD rotor were rusted and not working right. Got my new kit in and now I'm wondering what RPM and Degree my engine should be at? what RPM should the motors be at Full Advance?? I've heard 2800RPM...And what degree should the motors be set at?? What springs, and bashing do I use? Thanks
Boat runs about 86MPH right now. So I'm trying to get all the power out of it as possiable but still make it safe for my family outings.
Thanks Jordan
Boat runs about 86MPH right now. So I'm trying to get all the power out of it as possiable but still make it safe for my family outings.
Thanks Jordan
Last edited by KWIKSS; 03-25-2009 at 08:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Switzer SS240
General Q & A
17
06-22-2007 12:01 AM