![]() |
lesson on twin stepp take off
how do you guys accelatate from a no wake with out breaking props loose,I must be doing something wrong because as soon as I hit 2500 to 3000 rpm,props breaks loose,
had props checked out by airmarine and was told they are perfect,30 foot twin step boat with 496 mags,1.5 bravos spinning in 28 bravo 1s I was also told by others,welcome to the world of step bottom boats,that cant be right or is it? 1st time step bottom boat owner,all other boats have been V bottom boats. thanks for any input |
I just don't see it breaking the 28 p props loose whith stock 496 s
|
My 42 tiger would always break loose. I just knew right when it would and would pull back briefly then they would catch again and all was good. Would also start bringing the tabs up to help get on plane. Once I figured it out it was a piece of cake.
|
Originally Posted by BraceYourself
(Post 2830235)
My 42 tiger would always break loose. I just knew right when it would and would pull back briefly then they would catch again and all was good. Would also start bringing the tabs up to help get on plane. Once I figured it out it was a piece of cake.
|
I assume this boat is new to you could be the previous owner swapped props before they sold it also.
Did you take a test ride before purchase? If not try contacting the previous owner for tips or try a set of 5 blades. Trim the drives all the way in (also check the trim on the trailer) tabs down, and SLOWLY increase throttle, back off slightly when they start to break loose and ease into the throttles again. Hope this helps. |
You just need to pull back on the sticks when it starts to blow out and start trimming the boat out. My fountain would do the same thing....just didnt like to go slow :drink:
|
Originally Posted by tim brown
(Post 2830224)
I just don't see it breaking the 28 p props loose whith stock 496 s
thanks for the input |
Originally Posted by bobkatz
(Post 2830261)
I assume this boat is new to you could be the previous owner swapped props before they sold it also.
Did you take a test ride before purchase? If not try contacting the previous owner for tips or try a set of 5 blades. Trim the drives all the way in (also check the trim on the trailer) tabs down, and SLOWLY increase throttle, back off slightly when they start to break loose and ease into the throttles again. Hope this helps. did find some specs on the boat and the 496ho came with 30 bravos and the 496 mags came with 28 bravo which is what I got. thanks for the input. |
All fat gals report to the front of the boat.
|
Big question is............
How does it run once on plane. 1.) Does it accelerate well 2.) Does it turn max rpm without excessive trim 3.) How is the attitude of the boat If you answer yes, yes, and feels stable... Then... this aint your moms minivan, it takes a little finess. Your fine just learn its characteristice. The guys with cats have it way worse. |
| All times are GMT -5. The time now is 12:26 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.