Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Toulene (https://www.offshoreonly.com/forums/general-boating-discussion/206741-toulene.html)

HTRDLNCN 06-25-2009 03:55 PM

Wouldnt it be cheaper and safer to buy a barrel of VP race gas and mix it with your normal gas to raise octane?

RunninHotRacing163.1 06-25-2009 04:18 PM


Originally Posted by HTRDLNCN (Post 2896907)
Wouldnt it be cheaper and safer to buy a barrel of VP race gas and mix it with your normal gas to raise octane?

Do the math and you tell me what you come up with , base it on 300 gallons for a weekend just for chits & giggles ...


hope it comes out to at least 2 lap dances :lolhit:

sleek1 06-25-2009 05:37 PM

Make sure you handle it in a well ventilated area. It is a hazardous material.

10x 06-25-2009 08:39 PM


Originally Posted by RunninHotRacing158 (Post 2896925)
Do the math and you tell me what you come up with , base it on 300 gallons for a weekend just for chits & giggles ...


hope it comes out to at least 2 lap dances :lolhit:


Hey Bill, give me a shout. :grinser010:

Slinky 06-26-2009 08:01 AM


Originally Posted by sleek1 (Post 2896983)
Make sure you handle it in a well ventilated area. It is a hazardous material.

what he said, part of my job is dealing with pulling samples of this stuff...i sample it using a resperator as per the MSDS.

Coolerman 06-26-2009 08:42 AM


Originally Posted by RunninHotRacing158 (Post 2896843)
sprayed at higher boost levels to avoid detonation :drink:

or at part throttle settings to avoid detonation! :drink: just busting ya Bill

RunninHotRacing163.1 06-26-2009 08:48 AM


Originally Posted by 10x (Post 2897106)
Hey Bill, give me a shout. :grinser010:

Ring,Ring :bigbird:

ASC2009 06-26-2009 11:49 AM

Mixing in some 110 TrackTek race fuel sounds like it might be easier... I can ship it to you by the drum...

RunninHotRacing163.1 06-26-2009 12:36 PM


Originally Posted by saxman (Post 2897359)
or at part throttle settings to avoid detonation! :drink: just busting ya Bill

oh no !!!!!!!!!!!:eek::drink::lolhit:


All times are GMT -5. The time now is 06:08 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.