Valve covers.
 

Looking to buying two sets for big blocks. Need the kind for center rise gills. Like hardin ,cp ect. What kind do you guys think,will work that are nice and don't cost a ton of money.Looking for polished. Thanks JOHN

valve covers
 

T T T

I am also looking to by 2 pair. I am leaning towards the ones from eddie marine.

http://www.eddiemarine.com/store/car...l&p=11597&c=55

I just bought 2 sets off ebay for $125/set with $35 shipping for both. They are really nice covers. Try this link--if it doesn't work go to ebay do a search for marine valve covers and they will come up. http://cgi.ebay.com/ebaymotors/BIG-B...Q5fAccessories Send him a message and tell him what you want. He will send you a paypal invoice outside ebay and be done with it. I got mine today and they are bad a$$.

I bought 2 sets of the same ones and they worked and fit great. However I was stupid and forgot to wax them real good and while dialing the boat in with the engine hatches open the salt spray did a number on the finish. Maybe a clear coat? Their cheap enough that I'm gonna pick up 2 more sets.

Exactly what I was thinking

is there a knock out plug area for better breathers ?

I have two pair polished I will post some pics later. The are usedand i did drill holes in all four for breathers.

They are hard to keep looking nice, I would think painting or anodizing them would be the way to go.

I have three sets of Eddie Marine covers w/ breathers powdercoated red for $100.00 a pair.

Hey tomtbone, Can you send me a few pics of the red covers. I need 2 sets. Post them here or send to [email protected] Thanks! Bill

no have to have machined

I will try and get some pix tonight..Tom:ernaehrung004:

I've got two stock sets I'm trying to get rid of. Will let them go for $75 per set. pics at http://www.offshoreonly.com/forums/s...-each-obo.html

I will still get you some better pix

ttt.....anybody have some???

Anyone ever tried the composite valve covers? My engine builder wants to sell me a couple sets. He said all the race car guys are using them.

I just got my 2 sets from this guy. Very nice covers and a decent price!

302,

Did you look at these? http://cgi.ebay.com/ebaymotors/BIG-B...Q5fAccessories

cool--glad I could help

I'm also buying mine from this guy....

I would like to get one of these sets. Please PM me if still available.

Here are a few pics of the ones I just bought off ebay.

Are u still looking for two pairs of vc's? If so, and you want a pair of Teague (actually IMCO) polished alum valve covers with tall breathers, that is what I have. Both where sent to my polisher for a final buffing, then I applied Zoops sealant to preserve the nice polished finish. One pair has new been on a motor. One only has dyno time. Includes all hardware.
Teague------$ 248.00 pair Sell------$ 200.00 pair

http://teaguecustommarine.com//store...x&cPath=834_96

Why pay $125.00 when you can get these with the tall breathers, ultra polished and Zoop sealed.

I have the IMCOs, they are great. They look awesome and are extremely easy to keep looking new.