|
Need BRAVO 1 HELP ASAP!!
I took my boat out and docked it at the local marina, replaced my bunks and brought her back, when we pulled her out and reached the top of the ramp I hopped out to put on the tow straps and noticed that my drive was only halfway up. I tried unsuccessfully on several occasions both on land and putting her back in water, with the motor running, and not, the drive will only go half-way up and is just stops. The drive pump just quits like there is a kill switch, it works perfectly up to that point. I had to leave the boat at the dock parking lot, I cannot get it up the slightest hill and there are several.
1) Is there a way to release the drive and then lock-it in the up posistion? 2) WTF is going on? thanx |
Try the trailer switch
|
I tried the both the trim switch and the trailer switch neither worked.
|
limit switch out of whack?
Plus you can still jump the trim solenoid and run it up the rest of the way if it is the switches acting up. |
I swapped out the fuse, it was a bad fuse! As soon as I put the other fuse in, the trailer switch worked.
thanx for the replies |
easy fix
now what an easy fix huh why cant it always be that simple chris
|
I can't seem to find the fuse in my bravo ! :drink:
RHC |
Originally Posted by RHC
(Post 2850821)
I can't seem to find the fuse in my bravo ! :drink:
RHC |
| All times are GMT -5. The time now is 07:59 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.