Exhaust ?
04-28-2009, 07:13 PM
#1
Registered
Thread Starter
Join Date: Dec 2008
Location: Granite City IL
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust ?
I searched these on here but still looking for a little input. I just got the new engine in 25' IMP Eleganza. Its a .030 454 with a good set of decent flowing cast heads, mild hydraulic roller cam, roller lifters, edelbrock intake and a 750 carb. It has stock mercruiser exhaust manifolds.
The boat weighs 5600 lbs so Im not trying to set any speed records with it.
I found 2 sets of exhaust. One is a pair of Gill manifolds and risers and the other is a set of Patterson headers (wet). Either can be had for under $500 a pair.
My cams not big enough to worry about reversion I dont believe.
Does anyone have any input on which may work better or worse for any reason? Chances are I will be putting my mini blower on it next winter (if I can wait that long) and would like to know what the educated masses have to say about these!
TIA!!
The boat weighs 5600 lbs so Im not trying to set any speed records with it.
I found 2 sets of exhaust. One is a pair of Gill manifolds and risers and the other is a set of Patterson headers (wet). Either can be had for under $500 a pair.
My cams not big enough to worry about reversion I dont believe.
Does anyone have any input on which may work better or worse for any reason? Chances are I will be putting my mini blower on it next winter (if I can wait that long) and would like to know what the educated masses have to say about these!
TIA!!
Last edited by FlyinZX14; 04-28-2009 at 07:19 PM.
