Offshoreonly.com - 502 or 454 how to tell ?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - 502 or 454 how to tell ? (https://www.offshoreonly.com/forums/general-boating-discussion/208072-502-454-how-tell.html)

Back4More

05-08-2009 12:59 PM

Quote:

Originally Posted by Westcoast (Post 2861717)

The markIV 502 has a fuel pump mount!!

Man, I know less than I thought....time for me to quit talking.

risingsun

05-08-2009 01:24 PM

Quote:

Originally Posted by Back4More (Post 2861758)

Man, I know less than I thought....time for me to quit talking.

Thanks for all the input ! I ran the numbers and its a Gen IV 502. All my stuff is gen VI so I didnt get it. If any one is looking for this type let me know. It was a crate motor and has never been apart,I got it started and it ran fine. The boat is junk. It has trans too.
Thanks again
Bill:ernaehrung004:

Wobble

05-08-2009 01:28 PM

Quote:

Originally Posted by risingsun (Post 2861773)

You can run all your gen 6 accessories. Just install a fuel pump block off plate. The gen 6 engine does have some improvements to the castings affecting oiling and cylinder cooling I believe.

risingsun

05-08-2009 02:02 PM

Quote:

Originally Posted by Wobble (Post 2861780)

You can run all your gen 6 accessories. Just install a fuel pump block off plate. The gen 6 engine does have some improvements to the castings affecting oiling and cylinder cooling I believe.

Ill look into this a little more.I just hate to pass up a good deal on a big block. I think you talked me into it !! Yep Thanks

All times are GMT -5. The time now is 01:08 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page