Removing boat from trailer in driveway, pics...
#21
Registered
Thread Starter
Join Date: Dec 2008
Location: Detroit, MI/Lake Havasu, AZ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
I am adding a second set of boat jacks tonight. So even if the aft blocks kicked out, with the weight on the keel, and 2 stands per side prevent the boat from rolling?
Thanks for the advice everyone, I will definitely set everything up a little better next time with the input I have now... Hopefully no hurricanes blow through Detroit in the next week... lol
Thanks for the advice everyone, I will definitely set everything up a little better next time with the input I have now... Hopefully no hurricanes blow through Detroit in the next week... lol
#22
Registered
Join Date: Dec 2002
Location: Bucyrus, Ohio
Posts: 6,654
Likes: 0
Received 0 Likes
on
0 Posts
I would have to say your original setup is far superior to some of the stuff Ive seen in marinas that sat all winter.
Snap some pictures this fall when you are walking through a random marina, this board will have a field day!
Snap some pictures this fall when you are walking through a random marina, this board will have a field day!
#23
Registered
Join Date: Jan 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Portable Boat Lift
If you're like me you have tried any number of ways to separate your boat from your trailer to service the trailer or the boat hull. I have used a product by Portable Boat Lift that allows one person to safely separate their boat from their trailer in minutes, anywhere. They can be found at link below www.portableboatlift.com
#24
Registered
iTrader: (3)
If you're like me you have tried any number of ways to separate your boat from your trailer to service the trailer or the boat hull. I have used a product by Portable Boat Lift that allows one person to safely separate their boat from their trailer in minutes, anywhere. They can be found at link below www.portableboatlift.com
#25
Instatrim is made by Boat Levelers. You'll just rip the self tapping mounting screws out of the hull if you try to chain anything to them, or bend the SS plates and break the rams. Leave them up and alone. Yeah, those forwards stands are doing nothing w/o a chain from 1 to the other, then I can see the chain wanting to still slide forward. I'd move them towards the back where they will be pushing straight down as much as possible. They are mostly for keeping the boat balanced on your keel blocks, not support. But they gotta be secure.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 11:00 AM.
#26
Registered
Join Date: Dec 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't recommend cinder blocks...very weak and prone to breakage. If you wish to go with something like that, use concrete blocks. A little more expensive but a lot stronger. Wood works best.
#27
Registered
iTrader: (2)
DO NOT USE CINDER BLOCKS! they will fail easily under load, the pavers are a better option but not ideal, wood or purpose built stands are the best option. It is against OHSA regulations to use cinder blocks under scaffold legs, many people have been injured relying on them.
#28
Registered
I don't know where you guys are buying your cinder blocks but the ones around here I wouldn't prop up a dinghy. I picked a couple up out of the lumber yard a while back and the side crumbled in my hand when i grabbed it. Had another 2 fall apart in the back of the truck on the way to the job just from the vibration.