![]() |
Lots of steam/vapor coming from one side
I am having problems with one engine overheating (prior posts) due to sand getting sucked up. There is alot of steam coming out the exhaust on that engine(runs okay at lower rpm) might this be a head gasket or just cuz the engine is running too hot? Thanks alot
|
Originally Posted by brian18330
(Post 2859313)
I am having problems with one engine overheating (prior posts) due to sand getting sucked up. There is alot of steam coming out the exhaust on that engine(runs okay at lower rpm) might this be a head gasket or just cuz the engine is running too hot? Thanks alot
|
Brian,
Just had that same problem. In my case it ended up being a cracked exhuast elbow/riser dripping into the manifold... crack got larger and flooded the manifold. I orginally thought head gasket, but after tearing in down to replace that, still had the trouble. saw that more water was getting into cyclinders 4/6 and switched risers- problem solved. I'd check it out... take the riser off and look into the manifold. |
| All times are GMT -5. The time now is 01:17 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.