Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   New Fuel Tank: How much? (https://www.offshoreonly.com/forums/general-boating-discussion/208437-new-fuel-tank-how-much.html)

rtaylor 05-08-2009 12:21 PM

New Fuel Tank: How much?
 
Any rough estimates on how involved and how expensive it would be to take a 27' boat with a fiberglass fuel tank, open up the floor, clean it out, and place a new aluminum tank might be?

Thanks.

DareDevil 05-08-2009 12:42 PM


Originally Posted by rtaylor (Post 2861732)
Any rough estimates on how involved and how expensive it would be to take a 27' boat with a fiberglass fuel tank, open up the floor, clean it out, and place a new aluminum tank might be?

Thanks.

8-14 bucks per gallon for the tank, and about 1000 + for the labor !!:party-smiley-004:

RunninHotRacing163.1 05-08-2009 12:46 PM

Dayum we're gonna have to start callin you Scotty Sunkin :D




U know that $1,000.00 dont buy alot of shop or refinish time :cool:

DareDevil 05-08-2009 12:53 PM


Originally Posted by RunninHotRacing158 (Post 2861749)
Dayum we're gonna have to start callin you Scott Sunkin:evilb:

LOL:grinser010:

Philm 05-08-2009 01:01 PM

Not sure about the labor part, but I just had a 260gal aluminum tank built for $3200.

I would venture a guess to say that your tank is not that large. It definitely pays to shop around. I had estimates from $3200 to $6500+ for the same tank.

lucky strike 05-08-2009 01:27 PM

Fabricate 1 aluminum 110 gal tank..... $1100

New floor exactly like original. All new hoses & fittings. $4,000.

I don't think I got a deal but it is perfect like new.

. It was a very big & messy job on a 31 Sutphen, had to chop the floor out

Sea-Dated 05-08-2009 01:36 PM

PM Masher44 on here. He had this done in his Activator last summer.

Cut floor out, made custom tank and put it all back together again. I can't remember what he said it cost him.

Griff 05-08-2009 01:48 PM

Itr will probably depend a lot on what needs to be done to the floor. On my Pantera, the center section of the floor that covered the tank was a separate piece that could be easily removed and then screwed and caulked back in. If you've got to cut and reglass, its gonna get more expensive.

DareDevil 05-08-2009 06:46 PM

1 Attachment(s)

Originally Posted by rtaylor (Post 2861732)
Any rough estimates on how involved and how expensive it would be to take a 27' boat with a fiberglass fuel tank, open up the floor, clean it out, and place a new aluminum tank might be?

Thanks.

By the way ,,just did this one.

Pismo10 05-10-2009 07:57 AM


Originally Posted by Griff (Post 2861792)
Itr will probably depend a lot on what needs to be done to the floor. On my Pantera, the center section of the floor that covered the tank was a separate piece that could be easily removed and then screwed and caulked back in. If you've got to cut and reglass, its gonna get more expensive.

They should all be like that...


All times are GMT -5. The time now is 09:38 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.