Looking for info on 1989 24' from Aronow mold?
 

Anybody know anything about this boat? Thanks
http://phoenix.craigslist.org/nph/boa/1153007212.html

Looks like another take off of the 24 X 7 variety.

There were no 1989 Magnum 24's.

For history of 24's check out www.bananaboatco.com

Go to products, scroll down to 24 and read History of 24 footer.

Makes sense. I'm hoping someone has specific info about this particular boat. Thanks again. Dave911

Magnum Express Tantrum 24
 

Boat was manufactured by Magnum Express Powerboats, at 750 Copans Road, Pompano Beach, Fl. In business approximately 5 years, building the Tantrum 24 only. They were not from an Aronow or Magnum or Cigarette mold of any shape or length or kind. The new, never used, hull mold was purchased from Bob Saccenti @ Apache Powerboats & a Magnum Express deck was tooled. Apache never made a boat from the mold. The beam was 8'. It had a pad bottom, stepped transom & reversed chines & ran exceptionally well. Magnum Express built approximately 75 of the Tantrums in the 5 or so years they were in business.

I was under the impression that Bobby did build at least one 24' Apache. Am I mistaken?

First boat built with that mold had a stepped bottom and a race deck - this was the first race for Charlie Haimes as the navigator and sponsor of the boat.
http://www.youtube.com/watch?v=D-2Lnsj_D0A

Apache did build a completely different 7' beam boat. Apples & oranges.

Magnum Express Powerboats Tantrum 24
 

If "anyone" would know about this...you would. How ya do'n buddy?:drink:

Don't know anything about it, but it's a great looking boat, and seems like a good deal if everything checks out.



Darrell.

24 cig
 

I don't know if this helps any ,but there is a guy in Michigan,St.clair shores area, that is building the 24 ft. arnow hull brand new. single big block real small cuddy.

not sure of the name .