Hey CNC guys, can anyone help?
 

I was got back to my office from a run to palm beach to find out one of my front spinners was gone. The company that manufactured them were already out of business when I purchased them. I have searched for a few days, called every truck rim company I could fine and no one can help me. I love the spinners because I have never seen another Freightliner with them. They ar basically a basket that attaches to a added hub with a bearing. I have another hub and bearing so I just need the basket itself. At this point my only option is to have a new one made. I know there are a few CNC guys on here. I was hoping one of them would take on my newest challange. Can anyone help?

Try the chrome shop in Effingham Il. Truckomat
I-70-57, Exit 159
Effingham, Illinois
217-347-0151


or this onehttp://www.empirechromeshop.com/?gclid=CMTAyNeex5oCFWNM5QodRDAP3A

these guys may be the most likely to help you out. They have a show you might have saw on tv. http://www.chromeshopmafia.com/site/index.php/

I hope this may help you out

Gino,

I work on CNC, but our stuff is too small, we make dental implants, machines are only 20mm.

Are those for a 22.5" Diameter?

Who is the manufacturer of the spinner attachment?

check with Reds hydralics here in Miami, ask for Frank he should be able to help...

They are 22.5" The manuf. was Relative to Motion. They have been out of business for 2 years. The main distributor was Waynes wheels that can not help. They guy I bought them from had bought the remaining inventory from the manufacture. I contacted him and he has one set of 24.5". Worse comes to worse I'll take them. I don't know how they will look on my 22.5" rims. They will overlap the rim an inch on all sides. I could get 24.5 rims but then it's getting crazy. There has to be an option that makes sense.

A frieghtliner with spinners... Gino, you never cease to amaze me. If you don't find someone in a couple days, pm me. My uncle owns a machine shop, but I don't know how busy he is right now.

chromeshopmafia is a couple miles from me I will go ask them,, and if that doesnt work If you send me one of your other ones I can make you a duplicate to it.

I haven't seen a spinner in Houston this year, I thought they were long gone:evilb:

Gino;
Call me: 805-968-6122

roy...

Thank you!! I emialed Vhrom shop Mafia photos yesterday. I am waiting to hear from them Thank you again, I will probably need to take you up on it!!

Gino,
Is the 24" version the same, only the spokes are longer? If so, you may want to get that and see if the CNC guys can cut it down to match a 22". It maybe alot less CNC time and $.

Rick

HEY, THEY NEED TO BE BACK IN STYLE!

Gino, did you call Frank from Reds Hydralics here in Miami??? He does alot of Dually 22-24 wheels with airbags and such. He's been doing that for years and they do everything custom in house..