|
Jim Darr might have a set.... :drink:
|
How about a pair of 5 Blade Hering 16 1/2 x 32 Pitch ?
I am unsure of Rake's.These were run on a 40' Skater SuperCat. More #6's available also,but they are less pitch.. Make an offer to [email protected]. More #6's- http://www.offshoreonly.com/classifi...o29122-en.html http://inlinethumb58.webshots.com/30...500x500Q85.jpg |
Coincidence?
Originally Posted by GLH
(Post 2879171)
Jim Darr might have a set.... :drink:
|
Why does this Jim Darr keep popping up?
|
I have a set of Herring 16.8" X 33 pitch, 20*. These are a really strong 33, 4% slip on my MTI. However the rake will give ALOT more bow lift. Maybe more that you want.
|
Originally Posted by 44MTI
(Post 2879404)
I have a set of Herring 16.8" X 33 pitch, 20*. These are a really strong 33, 4% slip on my MTI. However the rake will give ALOT more bow lift. Maybe more that you want.
Ex. Gino had a set of 10 degree rake which I beleave the blades lay flatter. This would give less bow lift then a 20 degree? |
Originally Posted by 44MTI
(Post 2879404)
I have a set of Herring 16.8" X 33 pitch, 20*. These are a really strong 33, 4% slip on my MTI. However the rake will give ALOT more bow lift. Maybe more that you want.
Julie |
Ginos props are even less rake than the Turbine guys are running. I was really surprised when he said they were only 10 degrees of rake.
Julie |
Originally Posted by throttleup
(Post 2879417)
Ginos props are even less rake than the Turbine guys are running. I was really surprised when he said they were only 10 degrees of rake.
Julie |
Virtually new, test time only, no nicks.
Merc CNC 16.5 x 37 x18* R&L, 1200 HP blade. Due |
| All times are GMT -5. The time now is 10:58 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.