martini???
03-27-2002, 02:21 PM
#1
Registered
Thread Starter
martini???
anyone heard of a martini 25(???)... theres one in my area that sounds nice for 18k... please take a look and post opiniions... ted
http://adcache.boattraderonline.com/6/9/4/20957294.htm
http://adcache.boattraderonline.com/6/9/4/20957294.htm
03-27-2002, 02:41 PM
#2
VIP Member
i heard that they were excaliber splashes, also heard that they were decent boats too. . .. . narrow beam , about 7 foot an a few inches. . . decent rough water boat but probably torques to one side when equiped with a single. . . .i always thought they were cool looking. . . i wonder if he means the hull is kevlar, never heard of a carbon fiber hull in '79'. . . . a friend of mine used to have one, havnt seen it in a while though. . .
03-27-2002, 02:43 PM
#3
Gold Member
Gold Member
Join Date: Oct 2000
Location: Erie, PA US
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
dreamer,
A good friend of mine has a 25' Martini. What a great boat!! I boat in Lake Erie and this a great boat for this lake. My wife and I havve spent allot of time in this boat. If you have any questions please feel free to call me or send me and e-mail direct.
Chris
[email protected]
(814) 450-5529 - cell phone
A good friend of mine has a 25' Martini. What a great boat!! I boat in Lake Erie and this a great boat for this lake. My wife and I havve spent allot of time in this boat. If you have any questions please feel free to call me or send me and e-mail direct.
Chris
[email protected]
(814) 450-5529 - cell phone
03-27-2002, 04:15 PM
#6
Gold Member
Gold Member
Join Date: Oct 2000
Location: Erie, PA US
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Martini was a manufacture that used to build boats in the late 70's early 80's(not related to Corsa). A new builder (I think his name in Angel) near Miami is starting to use the old Martini molds to build these great boats again. I talked to the guy a few months ago, I think you can buy a new one for around $42K with out power. I will try to dig up the guys phone number.
03-27-2002, 04:43 PM
#7
GOT MERC?
Join Date: Aug 2001
Location: Boynton Beach FL
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
In April of 1977 the first 25 Martini was built. In 1980 the boat was retooled and named a 26 Corsa. The molds have been owned and built by one company Performance Plus Marine in Opa Locka Florida. The owner and proprietor is Bob Bauer. I personally have been doing business with him since the late 80s a great business man with a no bull**** attitude. You can contact him at 1-305-681-4342
03-28-2002, 08:47 AM
#10
Gold Member
Gold Member
Join Date: Oct 2000
Location: Erie, PA US
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Dreamer,
call Avenger Boats at 305-884-9959 (no web-site yet)
This company just started building boats using the old Martini molds. You can buy one for $12,500 with out power( not $42). I talked to them this morning. They are great rough water boats.
call Avenger Boats at 305-884-9959 (no web-site yet)
This company just started building boats using the old Martini molds. You can buy one for $12,500 with out power( not $42). I talked to them this morning. They are great rough water boats.
