Bladder Repair

Subscribe
06-30-2009 | 07:43 PM
  #1  
Need to repair to run Sarasota bladder is 2 years old.
Thanks
Steve

Bladder Repair-bladder1.jpg   Bladder Repair-bladder2.jpg   Bladder Repair-bladder3.jpg  


Reply 0
06-30-2009 | 07:48 PM
  #2  
I'd call the factory. My guess is they can repair them as needed.



Darrell.
Reply 0
06-30-2009 | 08:24 PM
  #3  
If it is a ATL cell, call them and get a repair kit. Do not try and send it back to them. The EPA will go nuts just ask Brett. When he tried to send one back, the gas smell set off all the alarms, even after washing it over and over.
Reply 0
07-01-2009 | 12:54 PM
  #4  
Do the bladders kinda bounce around? being its not in a container????
Reply 0
07-01-2009 | 03:32 PM
  #5  
Quote: Do the bladders kinda bounce around? being its not in a container????
Yes some but not as much as you would think.
Steve
Reply 0
07-01-2009 | 04:41 PM
  #6  
I used the ATL repair kit. It works for pin holes. That bladder should be in rubber lined fiberglass box according to ATL.
Reply 0