ssm V props
#3
Registered
Thread Starter
Join Date: Aug 2008
Location: haworth nj/lavalette nj
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
i have a 1980 39' cigarette and its a straight bottom with #V's and about 1400 total hp and i tried one pair of 3 blade props from the era of the boat and they have worked the best so far. the 4 blades just dont seem to work as well as the 3 blades
- i have not been able to find any other sets though and would like to try some more sizes in the 3 blade but they are impossible to find
-know of anything around?
- i have not been able to find any other sets though and would like to try some more sizes in the 3 blade but they are impossible to find
-know of anything around?
#5
Offshoreonly Advertiser
Offshoreonly Advertiser
I have a pair of 17x29 and 16 3/4 28 in 3 blade, also have some 16 1/4 x 29 5 blade.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#6
Registered
Thread Starter
Join Date: Aug 2008
Location: haworth nj/lavalette nj
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
4 blades
i have tried 17x30 4 blades which were too big, 16x29 which gave me trouble getting on plane because of the small diameter,17x29 which wouldnt spin enough,
3 blades
i tried a set of 17x30 which worked very well with 0 vibration which was a nice surprise but if i could get a set of 17x31/32 i think those would work best.
- i am full stagger so i cannot go more than 17.5 diameter and it seems i cannot turn anything bigger than a 29 4 blade
do you have anything i am looking for daredevil? thanks for the help
i have tried 17x30 4 blades which were too big, 16x29 which gave me trouble getting on plane because of the small diameter,17x29 which wouldnt spin enough,
3 blades
i tried a set of 17x30 which worked very well with 0 vibration which was a nice surprise but if i could get a set of 17x31/32 i think those would work best.
- i am full stagger so i cannot go more than 17.5 diameter and it seems i cannot turn anything bigger than a 29 4 blade
do you have anything i am looking for daredevil? thanks for the help