Offshoreonly.com - Look at this thing!

Page 2 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Look at this thing! (https://www.offshoreonly.com/forums/general-boating-discussion/213641-look-thing.html)

prostock85

07-25-2009 12:08 PM

1 Attachment(s)

Quote:

Originally Posted by BAJA WILL (Post 2917920)

Look at the stringer pics up in the bow, they didn't even make a composite sanwich, its just wood with laquer, stringers and bulk heads are 2" at most and their not even a solid piece, their cut to fit???? WTF, this boat could easily breakapart if it hit a wave, I have seen jon boats built better.:party-smiley-004:

At least now I know if I ever decide to take down my garage I can use the trusses to make all new structural members of my boat. Does home depot sell stainless nails?

dockrocker

07-25-2009 01:13 PM

Hey now, it's nice to see a hull that weighs less than the power package.

Jeff P31

07-25-2009 01:35 PM

What ever this guy is smoking I want some !!!! :rolleyes:

capone550

07-25-2009 02:47 PM

This boat used to be at the lake we go to. UGLY. I will promise you with everything I have this boat doesnt run anywhere close to 80. The guy also told us it is all balsa wood.

Roger 1

07-25-2009 05:59 PM

It almost looks to me that it was a "plug" that some mis-guided individual got ahold of and rigged.......sort of.

VtSteve

07-25-2009 06:58 PM

I would imagine with a weight of 1300 pounds, plus another 1000 for the engine/drive? Hit a wave and it breaks in two pieces. A bit stern heavy maybe? How hard can you push the envelope to get that kind of HP out of that engine?

AIR TIME

07-25-2009 07:49 PM

Quote:

Originally Posted by Roger 1 (Post 2918024)

It almost looks to me that it was a "plug" that mis-guided individual got ahold of and rigged.......sort of.

I AGREE IT LOOKS LIKE A PLUG:bigbird:

Lauderdaleboats

07-25-2009 09:09 PM

Bladerunner??

3 Attachment(s)

Looks like the plug for the original Bladerunner made in New Zealand. The newer bladerunners use a redesigned stepped hull and actually are quite fast. But yes, the ebay sales pitch is absolute Bullshi$$.

Audiofn

07-25-2009 09:32 PM

Quote:

Originally Posted by Roger 1 (Post 2918024)

It almost looks to me that it was a "plug" that mis-guided individual got ahold of and rigged.......sort of.

That is what I was thinking. Imagine if some unsuspecting guy buys that!:eek::eek:

mmareno

07-25-2009 10:20 PM

ALL THAT HORSE POWER THROUGH A RUBBER HOSE!!! Are they Stellings or CMI Big tube.. Wouldn't want to put a lot of back pressure on all that horsepower :bsflag:

Salesman or :bsflag:

Bid is at 676.00 Big ones.. What is the reserve you think??

All times are GMT -5. The time now is 09:04 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page