Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   mercruiser wiring loom (https://www.offshoreonly.com/forums/general-boating-discussion/214975-mercruiser-wiring-loom.html)

stirling 08-15-2009 03:02 PM
mercruiser wiring loom
 
Does anybody have a part number for a wiringloom for a mercruiser carburated engine ? I,m looking for the loom that mount into the boat with the big connector that connects to the engine ,and the other end to the gauges and stuff .
I could not find these looms on myMidas CD rom .
Its for a 502 magnum carburated engine .

Thanks

Griff 08-15-2009 08:08 PM
Available from CPPerformance or try Kirk at Elite Marine

http://www.cpperformance.com/SearchR...CategoryID=109

Ed 08-16-2009 05:15 PM
Originally Posted by stirling (Post 2932376)
Does anybody have a part number for a wiringloom for a mercruiser carburated engine ? I,m looking for the loom that mount into the boat with the big connector that connects to the engine ,and the other end to the gauges and stuff .
I could not find these looms on myMidas CD rom .
Its for a 502 magnum carburated engine .

Thanks
Mercury calls them an "Instrument Harness". Part #84-812475A20 for the 20 footer. Part #84-812475A25 for the 25 footer. Doller Marine or BAM Marine should have them on the shelf. Hope this helps.:flag:

stirling 08-17-2009 10:59 AM
Ok thanks ,this will help me out .

Thx A.J


All times are GMT -5. The time now is 06:35 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.