Out of Control testing in Long Beach Harbor
08-15-2009, 11:47 PM
#1
www.weismann.net
Gold MemberThread Starter
Out of Control testing in Long Beach Harbor
We were out testing today with Out of Control, 40 ss Skater Dutweiller 1800 plus hp engines and Weismann Marine 4-speed semiautomatic transmissions, shaft drives with a center rudder.
Rique Ford on the sticks and Thad (Jr) Finley on the wheel. platinum lent the props, Vern from West Coast drive service was helping.
Gary Smith came up from Newport with Alien to help with the testing and adjusting my pucker factor by making me freefall in his boat at speed during the test while I was trying to video...... Thanks Gary.
Working on getting her dialed in for the LOTO shoot out.
pat W
Rique Ford on the sticks and Thad (Jr) Finley on the wheel. platinum lent the props, Vern from West Coast drive service was helping.
Gary Smith came up from Newport with Alien to help with the testing and adjusting my pucker factor by making me freefall in his boat at speed during the test while I was trying to video...... Thanks Gary.
Working on getting her dialed in for the LOTO shoot out.
pat W
08-15-2009, 11:57 PM
#5
arneson-industries.com
Offshoreonly Advertiser
Shaft drives... Cute.. Last I checked they were Arnesons
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
08-16-2009, 12:06 AM
#6
www.weismann.net
Gold MemberThread Starter
This was a test to get Rique and Thad up to speed with the boat. This is a 3 year project and it is very complex. We got the water pressure under control today and several other gremlins....
The set was perfect.
Als goal is to be the worlds fastest pleasure boat.
This not the place to stretch her out. Big wakes tons of traffic. We wanted to get some time on the boat and try to determine the correct props for acceleration.
pat W
The set was perfect.
Als goal is to be the worlds fastest pleasure boat.
This not the place to stretch her out. Big wakes tons of traffic. We wanted to get some time on the boat and try to determine the correct props for acceleration.
pat W
Last edited by shifter; 08-16-2009 at 12:18 AM.
08-16-2009, 12:12 AM
#7
www.weismann.net
Gold MemberThread Starter
Thought you would enjoy that.
Here is a vid.... sort of.
The boat is on the left. http://www.youtube.com/watch?v=zb8KRHHjj-w
Thanks Gary for taking the time to come up and helping Als effort.
pat W
Here is a vid.... sort of.
The boat is on the left. http://www.youtube.com/watch?v=zb8KRHHjj-wThanks Gary for taking the time to come up and helping Als effort.
pat W
Last edited by shifter; 08-16-2009 at 12:17 AM.
08-16-2009, 01:32 AM
#8
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,707
Received 3,020 Likes
on
987 Posts
Thought you would enjoy that.
Here is a vid.... sort of. The boat is on the left. http://www.youtube.com/watch?v=zb8KRHHjj-w
Thanks Gary for taking the time to come up and helping Als effort.
pat W
Here is a vid.... sort of.
The boat is on the left. http://www.youtube.com/watch?v=zb8KRHHjj-wThanks Gary for taking the time to come up and helping Als effort.
pat W
Sweet project...Good luck with it.
08-16-2009, 08:22 PM
#9
www.weismann.net
Gold MemberThread Starter
Hang time...... That is decsribed in the webster dictionary for the time it took for the suction cup to grow out of my butt and grab the seat......I like the horizon going away.
Normally we zip out there and wait for the flyby but nooo Gary wanted to run.http://www.youtube.com/watch?v=paoPYqU2e8Q
Normally we zip out there and wait for the flyby but nooo Gary wanted to run.http://www.youtube.com/watch?v=paoPYqU2e8Q
08-16-2009, 08:30 PM
#10
www.weismann.net
Gold MemberThread Starter
