Offshoreonly.com - Standard Bravo 1 and HP 500 EFI

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Standard Bravo 1 and HP 500 EFI (https://www.offshoreonly.com/forums/general-boating-discussion/21677-standard-bravo-1-hp-500-efi.html)

220EagleXp

04-05-2002 06:36 PM

Standard Bravo 1 and HP 500 EFI

I just recently got a HP 500 EFI, and I have a standard Bravo 1 drive. Will I be ok with this setup. If I am not to hard on the throttle will I be ok, or will eventually the drive break? Thanks

rick32

04-05-2002 07:43 PM

Dude... you are fine........
Any boat, with any drive needs to ease up to plane.....

Rick32
:cool:

SteveS

04-05-2002 07:45 PM

We ran a stock Bravo in our F1 boat it stayed together, but we had to replace the gears after two events(1 race, and 1 poker run). You'll have to watch it if you start driving hard. Adding a drive shower and synthetic lube will help.
Check out www.driveshowers.com

Steve

220EagleXp

04-06-2002 11:49 AM

Thanks for the posts. Got the drive shower, which synthetic gear oil should I use. :cool:

All times are GMT -5. The time now is 03:44 AM.