![]() |
Originally Posted by cowisl
(Post 2968165)
Jeez. How are they holding up now?
|
Wow that sucks. So much for outboard reliability.
|
Try this again!
4 Attachment(s)
Lost blade on right hand motor, went through cavitation plate then made a hole in the right hand tower housing, then ricocheted into cowl on left hand motor. Have 7 of these 2 blade props now, the prop picture is from 06'.(Had already installed spare gearcase by the time I took picture of the tower housing)
|
Ah! the utter destruction!
I thought I was the only one with a wall of shame! You guys are making me feel real good.
|
Originally Posted by AppSysCons
(Post 2968167)
To soon to tell. Since the last set of failures, I have been on and off the trailer 7 times. That about about 10 hours of idle, to and from the ramp, and 7 hours of running on them.
|
:eek: You guys know how to break stuff the right way !!
|
Originally Posted by PURPLE HORNET
(Post 2971708)
:eek: You guys know how to break stuff the right way !!
|
3 Attachment(s)
Tickfaw,not mine ,was a clean boat.
|
Originally Posted by plumbers crack
(Post 2971663)
That sucks, Is that warranteed?
My warranty is good though April 2010, and since I feel, this action by MR is a breach of contract, I have be in contact with the State of Florida, Attorney Generals office. |
guess who had a hard time adjusting valves.
I know its not the winner but it made a little noise. Thanks to Joby i have had 80 hrs. of trouble free use! http://i91.photobucket.com/albums/k3...2/IMG_0939.jpg |
| All times are GMT -5. The time now is 02:40 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.