how wide is this hydro hoist?
Hey im looking at buying this hoist but the guy cant get to it any time soon to measure it. Its a 9000b built i would say mid 90's. My marina is a real pain when it comes to width and length
http://i71.photobucket.com/albums/i1...e/liftpix2.jpg http://i71.photobucket.com/albums/i1...e/liftpic1.jpg |
I have an 2002 10k lb Hydrohoist and it's 14 ft wide x 23.5 ft long.
Pat |
i was hoping it was less, my harbor master might not let me get it if its over 13.5 wide
|
If you can get a model # then Hydrohoist can tell you or its probably on their website. Mine is a 9000b I think, it was really hard on my insides getting it up in the air when I first got it but now I love it. It goes right up and down. Great lift.
|
Typically a Hydro Hoist can be adjusted for width. I know when I bought my 14K lift it had to widened to fit my 16' wide slip. Usually you can remove a few bolts and slide the frame in and out to make it wider or more narrow.
|
Originally Posted by Sea-Dated
(Post 2976117)
Typically a Hydro Hoist can be adjusted for width. I know when I bought my 14K lift it had to widened to fit my 16' wide slip. Usually you can remove a few bolts and slide the frame in and out to make it wider or more narrow.
|
i need it side mounted, its going to be located on a finger
|
Originally Posted by E Dock DD
(Post 2976409)
This is true for one that goes in a slip, but the one in the picture appears to be a side mount. For this reason, the width may not be adjustable, nor does it need to be adjustable. The question is does he need a side mount or one for a slip, or does he plan on using a side mount in a slip?
|
What is the location? Mabybe a member can run over and take a measurement for you.
|
Originally Posted by fishingdave
(Post 2975798)
My marina is a real pain when it comes to width and length
|
All times are GMT -5. The time now is 12:36 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.