Help need speedmaster 2 parts
#1
Charter Member
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Gretna, Ne
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Help need speedmaster 2 parts
My buddy blew his right hand speedmaster #2 lower. Looking for parts or maybe a whole drive. I told him not to hold his breath, but I would start looking.
mike
mike
#2
Guest
Posts: n/a
Those parts are HARD to find, Especaily Right Hand drives!
I have a complete Left Hand Drive, (had to Buy a pair just to get a RH), and 2 Complete Uppers, and a Mercury Racing Shortened Upper.
Also have lots of Prop shafts.
You can E-Mail me @: [email protected]
I only know of one place you can call, he had a complete #2 RH lower last year (716)693-6604 Eastpier Marine, Ask For Alex, and tell him Ron told you to call!
Good luck, i have been on the SSM #2 search many times!
RON...
I have a complete Left Hand Drive, (had to Buy a pair just to get a RH), and 2 Complete Uppers, and a Mercury Racing Shortened Upper.
Also have lots of Prop shafts.
You can E-Mail me @: [email protected]
I only know of one place you can call, he had a complete #2 RH lower last year (716)693-6604 Eastpier Marine, Ask For Alex, and tell him Ron told you to call!
Good luck, i have been on the SSM #2 search many times!
RON...
#5
Platinum Member
Platinum Member
Mike-
Speedmasters Inc and Cobra Power had a few #2 parts also. Your buddy might want to consider upgrading to (at least) a 3. Sometimes you can find used packages for not much more than a good #2. BTDT. Contact me if you need more info.
And no, still haven't tested those new props. Storms again this coming weekend!
John
Speedmasters Inc and Cobra Power had a few #2 parts also. Your buddy might want to consider upgrading to (at least) a 3. Sometimes you can find used packages for not much more than a good #2. BTDT. Contact me if you need more info.
And no, still haven't tested those new props. Storms again this coming weekend!
John
#6
Charter Member
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Gretna, Ne
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Thanks John, I will pass along the info. I think the 3's are out of the question. He doesn't have enough excess power to turn a 3.
Sounds like you need to get a speed rated umbrella if you are going ever get the props tested.
mike
Sounds like you need to get a speed rated umbrella if you are going ever get the props tested.
mike
#9
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
this might soudn really crazy but if he can't find any SSM2 parts he could sell his good SSM2 and the good parts in his bad one and put TRS drives on. It will rasie his x-dim an inch but they should bolt right up.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#10
Charter Member
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Gretna, Ne
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Puder,
I have already told him about that option. He is worried that with a TRS it will not get on plan. I told him I thought it would plan out better if he ran a good 4 blade prop. Never thought of selling the other drive though. Good idea, I will tell him.
thanks
mike
I have already told him about that option. He is worried that with a TRS it will not get on plan. I told him I thought it would plan out better if he ran a good 4 blade prop. Never thought of selling the other drive though. Good idea, I will tell him.
thanks
mike
Thread
Thread Starter
Forum
Replies
Last Post
kswest
General Boating Discussion
24
04-06-2006 02:24 PM