Carbon Fiber Vinyl pros and cons
#26
Registered
I had the Endurasoft blue carbon fiber vinyl in my last boat, and plan on using it again for accents when I update the interior on my current boat. Microfiber towels and BioKleen worked well for cleaning. I bought a soft brush used for bathing pets and it works really well for getting in the grain on traditional vinyl as well as the weave on the carbon fiber vinyl.
Also, I only really replied to this old thread to irk a moderator! Hi Brian!
Also, I only really replied to this old thread to irk a moderator! Hi Brian!
Last edited by Speedracer29; 01-17-2016 at 09:51 PM.
#28
All very true
But there are now multiple generations of "carbon fiber" vinyl, and they perform differently.
Also, Morbern offers a "patterned" vinyl, that some folks confuse with the 'carbon fiber'.
Morbern is a pressed in pattern.
Almost all 'carbon fiber' vinyls are weaves glued to a backing.
But there are now multiple generations of "carbon fiber" vinyl, and they perform differently.
Also, Morbern offers a "patterned" vinyl, that some folks confuse with the 'carbon fiber'.
Morbern is a pressed in pattern.
Almost all 'carbon fiber' vinyls are weaves glued to a backing.
#29
Registered
So after all this time, what is the best cleaner/conditioner to use on carbon fiber vinyl ?
#30
Registered
Join Date: Jun 2012
Location: Arlington, TN
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I have white carbon fiber vinyl and it is a pain in the ass to keep clean. have to get in all the grooves with a scrub brush. The people that say its easier to keep clean than smooth vinyl please let me know what you are doing because its not a simple task to keep white carbon fiber vinyl clean.