Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Tuning Mercury Outboards (https://www.offshoreonly.com/forums/general-boating-discussion/220764-tuning-mercury-outboards.html)

DeepV 03-16-2010 06:11 PM
never mind just found on previuos page

Double Rigged 03-16-2010 07:44 PM
Know Marty well. He does an awesome job on 2.5L.

FYI he will not touch a 3L. Been there done that. Call Eric Simon at Simon Motorsports. Had a 31' Fountain with 225hp 3L and ended up with close to 300hp. Motors ran great never had a problem with the powerhead. Just keep in mind the motor mounts and mid section/lower units were not built for 300hp.

You can also a Brucato intake system that gave my boat another 30hp.
In the end we had Boysen Reeds, Heads, 300x PCU/ECU's Brucato Intake System/ Coils and wires.


All times are GMT -5. The time now is 02:06 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.