Scarab 2 step hull with 500EFI's or 525SC's
#11
Registered
No, mine is white with some red/black graphics... I'd post a pic, but I don't think I have the ability on OSO. And I don't have 500's, I have Merc's 540 Bulldog which is completely different engine. With just over 300 hours, I'm looking at having the springs done after the first of the year. Overall, I've been very happy with the ride of the boat. The steps help your top end, but aren't too aggressive where you're going to get into trouble. My manual says the boat weighs right at 10,000 lbs dry, a little heavier than some, but it does good in the rough stuff at LOTO.
#13
Registered
Thread Starter
No, mine is white with some red/black graphics... I'd post a pic, but I don't think I have the ability on OSO. And I don't have 500's, I have Merc's 540 Bulldog which is completely different engine. With just over 300 hours, I'm looking at having the springs done after the first of the year. Overall, I've been very happy with the ride of the boat. The steps help your top end, but aren't too aggressive where you're going to get into trouble. My manual says the boat weighs right at 10,000 lbs dry, a little heavier than some, but it does good in the rough stuff at LOTO.
#14
Charter Member#93
Charter Member
I know of a clean 2000 38 avs with 600hp innovations and dpx drives. It is very strong sounding and very reliable and runs 82 to 84 gps. It's in maryland at Anchor marine.
__________________
Gellner Engineering 1025"s
Gellner Engineering 1025"s