Powdercoating?
 

Anyone know any good powdercoaters? I would like someone local (mid or SE Michigan) but I do have stuff that can be shipped if necessary. The couple I have used in the past either aren't around anymore or didn't do a great job previously. Just got some resto and trailer projects to complete. Thanks.

powder coating
 

This guy has done a ton of stuff for my boat and Cobra over the years. Everything turned out great and was done when he said it would be.

Jeff's Powder Coating
(734) 915-5777

http://jeffspowdercoating.org/

here is the info for the guy I use. He is just outside Chicago. He does alot of boat stuff along with everything else you can powdercoat. he has a big shop and ovens.

Lo-Ko Coatings
5340 W 111th Street, # 1, Oak Lawn, IL
708-424-7863

Ask for John

Thanks guys. I'll check these places out and start getting my parts together.

used these guys for years, they take pride in their work, very professional guys to deal with. located in shelby twp MI

www.qccoatings.com

Simply Custom

1732 Eureka
Wyandotte, Mi

734-558-4051

yep,not the cheapest,but the bet.:evilb:

http://www.exoticcoatings.com/index2.html

Located near Metro Airport, these guys have been in the business of pc a long time. Check them out. No stranger to doing business with Michigan boat builders either.

I have used them before. Yes you will find cheaper, but you will also find barespots, runs, and stuff never done on time. Exotic coatings prices are still reasonable, but of the 5 jobs I have taken them, 4 were done AHEAD of schedule, and in all cases the work was excellent.

They also have a large selection of powders and a large amount of sample coated pieces so you can see what it actually looks like as opposed to little chips and swatches.

i also used exotic coatings in romulus,,,,no problems

Jerad at Psyco Customs did some work for me. Did a great job and I though it was reasonable. tell him I told ya to call. He is in Bay City.
www.psychocustoms.com

damn thats alot of powder coaters in MI:eek: We might have 2 in Ms.

I forget the name, but if anybody is contemplating the powder coaters near port clinton on camp perry, DON'T!!!

They did all the parts on my skater. Boat, trailer, and truck. Sterling uses them for all their coating.

+1 on Q.C. Coatings

does anyone know if you have parts that are already powdered coated if you can get them redone a different color?

sure...they just sand blast off the old pc...

be careful with that because you can start wearing your metal away before it all comes off

F.Y.I. information I hear not all powder coatings are the same, make sure the color you use is U.V. stabile.