Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
30ft Velocity Twim OB Trailer >

30ft Velocity Twim OB Trailer

Notices

30ft Velocity Twim OB Trailer

Thread Tools
 
Old 01-13-2010, 11:49 AM
  #1  
Registered
Thread Starter
 
Join Date: Dec 2007
Location: Madison, WI
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default 30ft Velocity Twim OB Trailer

I need a trailer to pickup a boat. I tried to post in the correct section but no luck.

Looking for a nice used or new 5000# Tandem Axle drive on bunk trailer for a 1985 30 Velocity OB.

Aluminum or Steel. Needs to Make a Trip From Miami to Madison, Wi with no issues. . A spare, tongue jack and swing or removeable tongue woudl be great.

Spoke to Steve at Velocity. Says a Hull of this vintage should be around 3000# with interior ready for power. I'm adding 1000# for the motors & 500# for batteries rigging and gas for a total of 4500#.

Figure 5000# capacity should do it.

Do not want a Tri-Axle as they are to hard to move arond and they float when in the water

If nothing comes up I'll most likely end up picking one up at Ameritrail on the way Down

If anyone has lnfo or has owned this boat in a OB I would like to talk to them.

Boat will be rigged this season for Performance & Pleasure with stock 225 JohnnyRudes. Boat will go on weight diet. Figure it should go 65-70 flyin on the pad and tabs. More 2 Stroke OB Power will come later if Boat handles OK.

I have experience in this area. Any Reponse appreciated.

Scott
608 347 0027
[email protected]
[email protected]
Scotty Boy is offline  
Old 01-13-2010, 03:10 PM
  #2  
Registered
 
Join Date: Jan 2004
Location: carolina shores
Posts: 707
Likes: 0
Received 0 Likes on 0 Posts
Default

i had one if you have any questions [email protected]
Attached Thumbnails 30ft Velocity Twim OB Trailer-velocity-002.jpg   30ft Velocity Twim OB Trailer-velocity-001.jpg  
JERSEY DEVIL is offline  
Old 01-14-2010, 02:43 PM
  #3  
Registered
Thread Starter
 
Join Date: Dec 2007
Location: Madison, WI
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks,

I'll contact you

Scott

Last edited by Scotty Boy; 01-14-2010 at 05:29 PM.
Scotty Boy is offline  
Old 01-14-2010, 02:59 PM
  #4  
Registered
 
Brad Zastrow's Avatar
 
Join Date: Jun 2001
Location: McHenry, Illinois
Posts: 2,287
Received 79 Likes on 23 Posts
Default

Might want to check on Ebay. Some times there some good deals in the trailer section of "Ebay Motors"
Brad Zastrow is offline  
Old 01-16-2010, 02:19 PM
  #5  
Registered
Thread Starter
 
Join Date: Dec 2007
Location: Madison, WI
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default

Brad,

I've been looking everywhere when I can.

No luck on nice used so far. I've seen Lots a Junk though.

Since this is a OB hull its light for a 30 ft. comes in at 4500# rigged and dry.

3 Quotes on new Aluminum all at $4500-$5000. Custom fit to hull with factory pattern from Velo is the same price! Some will pickup and fit to boat for me. A nice service to offer

Here is what I get in Aluminum from 3 well established FL trailer manufacturers in FL

6000-7000#Load/7000-8000# GVWR
2 - 3500# Tandem Torsion axles
Surge disc all 4
Tongue jack
5 Spoke Mags/Goodyear marathons
LED lights
Reverse lights
4 bunks
Removable tongue

I remember south FL Aluminum trailers in this size used to be $2500-$3000. Then I remembered that was over 20 years ago.

It's never easy.
Scotty Boy is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.