fastkat

I'm thinking of buying a 36 spectre and putting tcm 1450 quad rotor engines in it. can the boat handle that or is that to much? do people put #6 on spectres i haven't seen any.

Ryan Beckley

Otto Fisher "Whiplash" of NY had a MEGA HP 36' Spectre with 6's, don't know the top speeds though.

Jesse James

Skater is more proven in that hp/drive set up...may be something worth looking into, some good deals out there now...

LubeJobs42

iTrader: (2)

I had 1150's in my 35 Motion. It ran 154 which was fast enough for that boat. The Spectre has a wider tunnel. Not sure what the Specte would be like with that power. I have 1550 quad rotors now and couldn't imagin them in a 35!!!! I would think it would be overkill but I am a firm believer in overkill!!!

chad1

Im sure Shawn and Howard Davis have been right at 170 in a spectre with BRAVOS.

obrien

The 36 spectre doesn't really like #6's. If you have to have those drives you will need to have the notches filled for the boat to run right. That boat with 750s to 850s is plenty of power for the speed potential of the hull. If I remember correctly we build one with a pair of 850 sterlings and B-max drives that ran 135 mph with plenty of throttle left.

fastkat

thanks

OL40SVX

Id say find a Skater, MTI, Nor-Tech, or OL cat.

Anarchy Powerboats

scary.

shawn

I have a 1999 for sale if you are really interested. Xrs with 500HPS.