Need Furuno Help...
#1
Registered
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Lake Norman/ Cornelius, NC
Posts: 1,630
Likes: 0
Received 3 Likes
on
2 Posts
Need Furuno Help...
Does anyone have a good outlet for reasonably priced Furuno parts. I was removing the back plate off my Nav-Net system and sheared the pins clean from the master plug... I need another male plug to solder into the mother board. Any help would be appreciated.
T.
T.
#2
Registered
I've bought repair parts for Furuno right from Furono. It has been a while, but I downloaded a parts book, and then ordered the parts from their site. The parts were reasonably priced.
This was maybe 6 or 7 years ago. Don't know if you can do it directly online. I am sure they have a "contact us" link.
This was maybe 6 or 7 years ago. Don't know if you can do it directly online. I am sure they have a "contact us" link.
#3
Registered
Thread Starter
iTrader: (2)
Join Date: Sep 2005
Location: Lake Norman/ Cornelius, NC
Posts: 1,630
Likes: 0
Received 3 Likes
on
2 Posts
I've bought repair parts for Furuno right from Furono. It has been a while, but I downloaded a parts book, and then ordered the parts from their site. The parts were reasonably priced.
This was maybe 6 or 7 years ago. Don't know if you can do it directly online. I am sure they have a "contact us" link.
This was maybe 6 or 7 years ago. Don't know if you can do it directly online. I am sure they have a "contact us" link.
Thanks for the help and advice
T