![]() |
Swirl-Away High Performance Sea Strainer
1 Attachment(s)
Has anyone installed these ..... and ..... what's your opinion if you did.
Thanks Swirl-Away High Performance Sea Strainer |
Kpm Sea And Sand Strainer
1 Attachment(s)
also the KPM's ..... feedback please.
|
I had the kpms... serious hardware.
I was very impressed. |
I have a large KPM strainer available 6"X18" will handle 2 engines easily. $400.
|
Originally Posted by Stormrider
(Post 3058503)
I had the kpms... serious hardware.
I was very impressed. |
Originally Posted by fireboatpilot
(Post 3058509)
I have a large KPM strainer available 6"X18" will handle 2 engines easily. $400.
|
The swirl aways are Great. They eat the grass as it swirls around. I used to have to stop half way between Miami and Key West to clean out strainers, no more. I empty them at the dock now.
|
Originally Posted by Zero Patience
(Post 3058618)
The swirl aways are Great. They eat the grass as it swirls around. I used to have to stop half way between Miami and Key West to clean out strainers, no more. I empty them at the dock now.
|
No, sorry it's used. New this one is around $1200. Has a blue top.
|
Originally Posted by fireboatpilot
(Post 3058643)
No, sorry it's used. New this one is around $1200. Has a blue top.
|
Pics sent.
|
Originally Posted by fireboatpilot
(Post 3058720)
Pics sent.
We will get back to you via email. |
Originally Posted by TSPM
(Post 3058524)
OK Storm ...... but they are not SS, so does the aluminum get blown out from the salt water?
|
Originally Posted by Stormrider
(Post 3058972)
I only had it for one year, 2005. Board member Ziemer has the boat now. Always looked fine for me... but as i said, it was only one yr. You may want to contact Ziemer... he'd be happy to answer your questions.
|
I have used quite a few of them in customers boats and have been very pleased with them. Don't think you can go wrong with one.
Eddie |
Originally Posted by Young Performance
(Post 3059011)
I have used quite a few of them in customers boats and have been very pleased with them. Don't think you can go wrong with one.
Eddie |
Originally Posted by fireboatpilot
(Post 3058720)
Pics sent.
|
| All times are GMT -5. The time now is 07:24 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.