wazz-up racing engines
#1
Registered
Thread Starter
Join Date: Jan 2006
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
wazz-up racing engines
just purchased two used 540 cid engines that were built by wazz-up racing out of n.j. the engines are 540 n/a solid cam,brodix heads,720h/p. with 20 hours on them since they were done.having them dyno tested next week,but just looking for some input. thanks tom
#4
VIP Member
VIP Member
Tommy, I've been running Wazzup Racing Engines since 2003, got a National Championship, A World Championship a couple of Class 4 overall High Points Championships plus Smitty's my partner. Listen, like in any business...anything can happen on any given Sunday! The 540's is what we used to run. Good Engine, just keep up on it. Augie
__________________
P4-13 Team THE JERSEY BOYZ OFFSHORE POWERBOAT RACING, OPA/ SBI/APBA/UIM. PRESIDENT: THE JERSEY BOYZ , VICE-PRESIDENT: OPA RACING, THE GREAT SOUTH BAY RACING ASSOCIATION. WAZZUP RACING ENGINES
P4-13 Team THE JERSEY BOYZ OFFSHORE POWERBOAT RACING, OPA/ SBI/APBA/UIM. PRESIDENT: THE JERSEY BOYZ , VICE-PRESIDENT: OPA RACING, THE GREAT SOUTH BAY RACING ASSOCIATION. WAZZUP RACING ENGINES
#5
Registered
Thread Starter
Join Date: Jan 2006
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
wazz-up
i will be dyno testing those engines next week,then they are being disassembled to make sure the reciepts match the parts that were installed. i searched the web for any comments on wazz-up engines,but did not have much luck.the guy who had them built spent over 40,000 dollars for 2 540's so i can expect only high end parts and a clean bill. thanks tom p.s. I HOPE!!!!!!!!!!!!!!!!!
#6
Registered
Thread Starter
Join Date: Jan 2006
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
wazz-up
i will be dyno testing those engines next week,then they are being disassembled to make sure the reciepts match the parts that were installed. i searched the web for any comments on wazz-up engines,but did not have much luck.the guy who had them built spent over 40,000 dollars for 2 540's so i can expect only high end parts and a clean bill. thanks tom p.s. I HOPE!!!!!!!!!!!!!!!!!
#7
Registered
Thread Starter
Join Date: Jan 2006
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
wazz-up
i will be dyno testing those engines next week,then they are being disassembled to make sure the reciepts match the parts that were installed. i searched the web for any comments on wazz-up engines,but did not have much luck.the guy who had them built spent over 40,000 dollars for 2 540's so i can expect only high end parts and a clean bill. thanks tom p.s. I HOPE!!!!!!!!!!!!!!!!!