|
New Motors
1 Attachment(s)
These motors should give the 1300s a run for there money...
We might have to do something about the RPMs Though... |
Originally Posted by JeffC
(Post 3074245)
These motors should give the 1300s a run for there money...
We might have to do something about the RPMs Though... |
Hmmmm....Twins??...definitely gonna need a scoop!! :eek:
|
Bigger Is Better
Wait till you see the new cruiser Reggie is building for them!! The beak is 23 foot long!!
Best Regards, Ray @ Raylar |
Yeah, made in Japan ....more junk.
|
I have helped pull some pistons on a 7 cyl Wartsila before. If I recall correctly, it was something like 3,000 hours between ring changes. We always had a spare piston on board, so the engine wasnt down for more than a few hours.
|
Do they use some sort of transmission, gearbox or does it turn a generator? Doug
|
The ship I worked on used a straight drive coupled to a variable pitch propeller. the engine ran a constant 115 rpm. the drive shaft was like 90 feet long and 18" in diameter turning a 20 foot pitch prop. we would run 20 knots.
|
thats nothing you should see the dyno for it
|
| All times are GMT -5. The time now is 06:16 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.