JeffC

These motors should give the 1300s a run for there money...

We might have to do something about the RPMs Though...

anewway

iTrader: (1)

Gonna need a blower to really get them to open up.

rangerrick63

Hmmmm....Twins??...definitely gonna need a scoop!!

Raylar

Wait till you see the new cruiser Reggie is building for them!! The beak is 23 foot long!!

Best Regards,
Ray @ Raylar

Back4More

Yeah, made in Japan ....more junk.

Philm

I have helped pull some pistons on a 7 cyl Wartsila before. If I recall correctly, it was something like 3,000 hours between ring changes. We always had a spare piston on board, so the engine wasnt down for more than a few hours.

outriggers

Do they use some sort of transmission, gearbox or does it turn a generator? Doug

Philm

The ship I worked on used a straight drive coupled to a variable pitch propeller. the engine ran a constant 115 rpm. the drive shaft was like 90 feet long and 18" in diameter turning a 20 foot pitch prop. we would run 20 knots.

JIMKID Motorsports

thats nothing you should see the dyno for it