Speaker recommendations
#1
Platinum Member
Platinum Member
Thread Starter
Speaker recommendations
I'm looking for some good quality 6x9 marine speakers for some cut-outs in a rear seat base. This doesn't seem to be that popular of a size anymore. I was also wondering if the component speakers, such as JL 7.7 are that much better than their coaxial 7.7? I just don't want more holes than are needed. Opinions? Thanks, Steve
#3
Registered
Polks for sure!!! They have crossovers built in too!! http://www.polkaudio.com/caraudio/db...s=db6501#db691
I painted my plastic grills to match trim on boat.
They are by far the best 6X9's out there IMO
I painted my plastic grills to match trim on boat.
They are by far the best 6X9's out there IMO
Last edited by chattviper; 04-09-2010 at 07:40 AM. Reason: .
#5
Registered
Join Date: Oct 2005
Location: Lake Norman, NC
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
JL all the way.
You can go with the seperates or with the all in one 7.7.
I have 6 of the seperates in my boat with 2 12's in ported boxes up under the dash.
It rocks.
You can go with the seperates or with the all in one 7.7.
I have 6 of the seperates in my boat with 2 12's in ported boxes up under the dash.
It rocks.
#6
Registered
JL's are really nice, but if you just want to use the existing 6x9 cutouts, the new Polk MM's are the way to go. http://www.polkaudio.com/caraudio/mm/index.php?s=mm691
My cafe had a 6x9 & a 6.5" mounted at ankle level under the bolsters. A great spot for speakers. I ended up replacing them w/ Polks. I then want to add additional speakers higher up in the gunwale. Trying to decide if i just wanna stay w/ the Polk 651UM's or use JL's up there.
My cafe had a 6x9 & a 6.5" mounted at ankle level under the bolsters. A great spot for speakers. I ended up replacing them w/ Polks. I then want to add additional speakers higher up in the gunwale. Trying to decide if i just wanna stay w/ the Polk 651UM's or use JL's up there.
#7
Charter Member # 55
Charter Member
DC Gold. They don't have the name recognition of the other brands but are incredible speakers. Rated at 80watts rms and 300 peak, but I would say that is conservative. I'm putting over 100rms to mine. 100% waterproof and a 3 year warranty.
#8
Registered
i copied the wrong link...your right...MM's is what I meant.
I have 12 of these in my pontoon boat. LOL
I have 12 of these in my pontoon boat. LOL
JL's are really nice, but if you just want to use the existing 6x9 cutouts, the new Polk MM's are the way to go. http://www.polkaudio.com/caraudio/mm/index.php?s=mm691
My cafe had a 6x9 & a 6.5" mounted at ankle level under the bolsters. A great spot for speakers. I ended up replacing them w/ Polks. I then want to add additional speakers higher up in the gunwale. Trying to decide if i just wanna stay w/ the Polk 651UM's or use JL's up there.
My cafe had a 6x9 & a 6.5" mounted at ankle level under the bolsters. A great spot for speakers. I ended up replacing them w/ Polks. I then want to add additional speakers higher up in the gunwale. Trying to decide if i just wanna stay w/ the Polk 651UM's or use JL's up there.
#9
Platinum Member
Platinum Member
Thread Starter
I don't think JL offers a 6x9 size, otherwise I'ld be very interested. I've heard a lot of good comments about them! Steve
#10
Platinum Member
Platinum Member
Thread Starter
Griff, I know that DC Gold is the old Babb and they have a good reputation but the grills are a little dated in styling. I don't want to go with billet grills, any other aftermarket grills available that would fit? So far the Polk MM's seem to be my best choice, any others worth looking at? Thanks, Steve
Last edited by 509 SC; 04-09-2010 at 06:03 PM. Reason: spelling