Are propshaft threads repairable?
 

If you have had any experience with damaged threads on a propshaft, please take a look at this thread:

http://www.offshoreonly.com/forums/d...ml#post3101794

I could use the input before I move forward.
Thanks in advance.

Should be,some things should be left to a machine shop!
Post some pics.

Brian, Snapon makes a thread chaser that you can put on the good portion of the shaft and thread off. It clamps on and has interchangable cutters.

Or - as Hotpursuit says bring it to a machine shop. If you want to send it down here we can clean it up for you.

Thank you Marc. I am sending you an email.

I can fix it., can you bring it by my work.

Thank you Greg! I may do that next week. I will call you if so.

Should be able to do it in just a few minutes if it can be done. Sounds like a chaser or thread file and you will be good as new, I do it all the time here with axles, cranks, steering stems, so I am sure I have the tools needed. I am here M-F 9ish to 7ish you still have my cell # ?

Id like to see a pick for future referance.

I had a buddy on a vert shaft threads that were messed up he just took a file to it, I would of screwed it up If i did that:drink: