motor install help.
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: Daphne , Alabama
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
motor install help.
Im trying to finish up installing my 500efis ,and one hose has me stumped . It is the hose coming off of the cooling pipe on the lower port side of motor. Appears to be ATF coming out of it. (powersteering) It was cut when i got the motors , so i am assuming it was a feed to somewhere on the boat. Where do i need to run this? I do have dual hydraulic steering.
#3
Registered
Thread Starter
Join Date: Aug 2006
Location: Daphne , Alabama
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
thats what i was thinking , but thought why would it have been cut. Unless he had the tank mounted on the boat.?? ,but then again the stock resevoir is still on the motor with the feed and factory return still piped in.