Offshoreonly.com - Pantera 41' Launched

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Pantera 41' Launched (https://www.offshoreonly.com/forums/general-boating-discussion/231952-pantera-41-launched.html)

Quote:

Originally Posted by sean stinson (Post 3128842)

It was the mold that Thad Allen had toole dwhen the new revived Apache was coming on line before all the bs now then the steps you have to talk to Pepe about but I am pretty sure you can still get a straight bottom version....

The Pacific......most peoples rough is calm to us....Pt Conception is a good one to try to compare you silly little bumps to.....

Any better pics of this thing Sean?

WOW... that is BEAUTIFUL!!!!!

Good Job Pantera...

Whos going to be the first one to order one with 700's....lets talk...

how about more build pics and some vid???

:hitit: just sayin... now that thay have built one i need a price so i can strart a rainy day fund for a new boat! pantera has always been on the top of my list for the next boat!:evilb:

850s and 6s sound about right. I know where fresh mercs are factory done just need a hull to put them in

Quote:

Originally Posted by thisistank (Post 3128831)

Hahaha! Ask stinson about the Pacific, he's been caught slippin out here before! :eek: the big blue will bite'cha when you least expect it.

It appears, with that package, you could run out in some big water, lay the sticks down and sip a martini in that beast!

Just to clarify, this is an older apache mold that was stepped? Thought I read that somewhere.

THIS IS NOT AN OLDER MOLD. This is a newly tooled and impproved version of the original 41. The original lines and measurements came directly from the Warpath race boat, but was done the old fashioned way. Then the tooling was built from foam based on those measurements. There were some major flaws in the way the company did the tooling and Steve 1 and his brothers did some serious re-work to get the tooling straight as the so-called tooling work was poorly done. The tooling was a major job since we straightened the bottom and sharpened the edges - the way it was originally done it incorporated ALL the flaws of the original 41...so we fixed, straightened and sharpened EVERYTHING.

This included "inches" of additional height to make the bottom straight and level as the original tooling had a bad rocker in it.
It was all done as a non-stepped hull with a new and improved straight bottom, NO ROCKER!!!

Then Pantera bought the tooling and made it their own by adding a stepped insert to modify and improve the running surface - this IS NOT the T4 that Steve 1 was tooling up, it is the original straight bottom molded 41 that was to be a retro version of the original for the new Thad Allen Apache.

hope this helps!:drink:

Did Cosker design the step bottom that is underneath it?