Imco Shorty - Scarab / Excalibur 26 ?
I have a Wellcarft Excalibur 26, its a 26 Scarab hull below the rub rail for those that do not know the boat.
It time to change the drive and considering a imco short on the bottom end. I wanted to see if any one has try one on this hull and what the results were as it a very low x dimension. It would be going on a 1.5 Bravo upper with a 600 HP Tyler Crocket powerplant. |
Originally Posted by JBoat
(Post 3154392)
I have a Wellcarft Excalibur 26, its a 26 Scarab hull below the rub rail for those that do not know the boat.
It time to change the drive and considering a imco short on the bottom end. I wanted to see if any one has try one on this hull and what the results were as it a very low x dimension. It would be going on a 1.5 Bravo upper with a 600 HP Tyler Crocket powerplant. |
Boat is a 2002.
Is propshaft height just the distance from the hull to the shaft vertically ? |
Originally Posted by JBoat
(Post 3154551)
Boat is a 2002.
Is propshaft height just the distance from the hull to the shaft vertically ? |
Nutz... my old drive is already off and peices.
My down draft is 38" if that helps at all. And it is not a stepped hull, doesnt really need it as it plains pretty quick. |
A 3 blade prop on a standard length lower would do more for you on top end speed and also save the drive with added slip on re-entry.
|
All times are GMT -5. The time now is 01:08 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.